EN 1.4162 / LEAN DUPLEX UNS S32101 / LDX 2101

• Applications

  The main applications are for details with corrosion resistance and/or higher strength demands than 304L / 316L.

  LDX 2101 is characterized by:

  • Ideal for tank production where corrosion strength is sufficient.
  • Good resistance to stress corrosion cracking.
  • Good resistance to general corrosion.
  • High mechanical strength.
  • High resistance to erosion corrosion and corrosion fatigue.

• Heat Treatment and Weldability

  Solution annealing at 1020 – 1100°C followed by water quenching.

  Weldability: Very good

• Chemical Composition

  Weight %	C	Si	Mn	S	P	Cr	Ni	Mo	N	Cu
  Min.			4,00			21,00	1,35	0,1	0,20	0,10
  Max.	0,040	1,00	6,00	0,015	0,035	22,00	1,90	0,8	0,25	0,80

  PRE value %Cr + 3.3%Mo + 16%N of ≥26

• Heat Treatment

  EN 10088-2, EN 10088–4, ASTM A240, EN ISO 9445-2

  Approvals

  NACE MR0175/ ISO 15156-3:2015, PED 97/ 23/ EC, CPR 305/ 2011/ EU

• Mechanical Properties

  	Yield strength Rp0.2, MPa	Tensile strength Rm, MPa	Elongation [%]	Hardness [HB]	Impact, Charpy-V, -40ºC [J]	Surface
  PLATE CR (COIL)	≥ 530	≥ 700	≥ 30		≥ 50	2B/2E
  PLATE HR (COIL)	≥ 450	≥ 650	≥ 30	≤ 290	≥ 50	1D
  PLATE (QUARTO)	≥ 450	≥ 650	≥ 30	≤ 290	≥ 27	1D

Stocked products and dimensions

• Plate Stock

  MEASUREMENTS	KG/PLATE
  1 X 2000 X 6000 mm	96
  1,5 X 2000 X 6000 mm	144
  2 X 2000 X 6000 mm	192
  2,5 X 2000 X 6000 mm	240
  3 X 2000 X 6000 mm	288
  4 X 2000 X 6000 mm	384
  5 X 2000 X 6000 mm	480
  6 X 2000 X 6000 mm	576
  8 X 2000 X 6000 mm	791
  10 X 2000 X 6000 mm	988
  12 X 2000 X 6000 mm	1187
  15 X 2000 X 6000 mm	1483
  20 X 2000 X 6000 mm	1978
  25 X 2000 X 6000 mm	2472
  30 X 2000 X 6000 mm	2966
  35 X 2000 X 6000 mm	3460
  40 X 2000 X 4000 mm	2637
  45 X 2000 X 4000 mm	2966
  50 X 2000 X 4000 mm	3296
  60 X 1500 X 6000 mm	3296

• Coil Stock

  1500 MM	2000 MM
  1,5 mm	3 mm
  2 mm	4 mm
  3 mm	5 mm
  4 mm	6 mm
  5 mm
  6 mm